Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

Subscribe

Add to Del.icio.us

DIGG this!


Feedback


Yes No

Related Categories

Products

Development Topic

Related Links - Developer Zone

Related Links - Products and Services

User Defined Step to Create XY Graph in SignalExpress

0 ratings | 0.00 out of 5
Print

Downloads

Filename: convertxandytoxy.zip
Requirements: View

This example SignalExpress project uses a User-Defined step to create an XY graph from two waveform inputs. For the example, two simulated sine waves are used. The two input waveforms are shown in the top display, and the XY graph output is shown in the lower display.

The LabVIEW VI unbundles the waveform input to obtain the data array from each. The data arrays from the two input waveforms are rebundled for an XY graph. LabVIEW is not required to run this example.

Requirements


Filename: convertxandytoxy.zip

Software Requirements


Application Software: LabVIEW Full Development System 7.1, SignalExpress Development System 1.1
Language(s): Other

 
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).