Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

Using the JAI CV-A11 Camera in Asynchronous Reset Mode with the IMAQ 1409

2 ratings | 3.00 out of 5
Print

Downloads

Filename: 203066.zip
Requirements: View

This example demonstrates how to acquire images using the JAI CV-A11 camera in asynchronous reset mode using the National Instruments IMAQ 1409 device. It is meant to accompany the tutorial by the same name that can be found using the related links below.


Related Links:
Using the JAI CV-A11 Camera in Asynchronous Reset Mode with the IMAQ 1409

Requirements


Filename: 203066.zip

Software Requirements


Application Software: LabVIEW Full Development System 6.0
Language(s): LabVIEW

Hardware Requirements


Hardware Group: Vision (IMAQ), Serial
Driver: NI-VISA 2.5, NI-IMAQ 2.5

 
2 ratings | 3.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).