Using NI-IMAQ to Reacquire Lost, Corrupted, or Switched Video Signals
PrintDownloads
Filename: cvi_reacquire_imaq_llring.zip
Requirements: View
Filename: cvi_reacquire_imaq_hlring.zip
Requirements: View
Filename: cvi_reacquire_vision_grab.zip
Requirements: View
Filename: 203087.zip
Requirements: View
Filename: 203085.zip
Requirements: View
Filename: cvi_reacquire_imaq_hlgrab.zip
Requirements: View
When NI-IMAQ loses the camera or video signal, it generates the following error indicating that the image acquisition device did not acquire the entire image:
Error 1074397150 NI-IMAQ: (Hex 0xBFF60022) (IMG_ERR_TIMO) wait timed out; acquisition not complete
Possible reasons:
-Lost video signal: the cable was disconnected or the camera lost power
-Corrupted video signal: if using a VCR, fast-forwarding or pausing causes the timing information to change
-Switched video signal: if acquiring from a cable box and the channel is switched, the timing information synchronizes with the new channel
The following examples reacquire a video signal after the error (1074397150) has been generated. When the error generates, it is stored in the NI-IMAQ driver for that particular instance of NI-IMAQ. You can clear the error by closing that instance of NI-IMAQ and starting a new one.
When trying to reacquire, the error (1074397153) occurs if the video signal is not available. When the error occurs, repeat the loop until the video signal is reacquired.
Requirements
Filename: cvi_reacquire_imaq_llring.zip
Software Requirements
Application Software: LabVIEW Full Development System 6.0, LabWindows/CVI Full Development System 5.5
Language(s): C, LabVIEW
Hardware Requirements
Hardware Group: Vision (IMAQ)
Driver: NI-IMAQ 2.5
Software Requirements
Application Software: LabVIEW Full Development System 6.0, LabWindows/CVI Full Development System 5.5
Language(s): C, LabVIEW
Hardware Requirements
Hardware Group: Vision (IMAQ)
Driver: NI-IMAQ 2.5
Software Requirements
Application Software: LabWindows/CVI Full Development System 5.5, LabVIEW Full Development System 6.0
Language(s): LabVIEW, C
Hardware Requirements
Hardware Group: Vision (IMAQ)
Driver: NI-IMAQ 2.5
Software Requirements
Application Software: LabVIEW Full Development System 6.0, LabWindows/CVI Full Development System 5.5
Language(s): C, LabVIEW
Hardware Requirements
Hardware Group: Vision (IMAQ)
Driver: NI-IMAQ 2.5
Software Requirements
Application Software: LabVIEW Full Development System 6.0, LabWindows/CVI Full Development System 5.5
Language(s): C, LabVIEW
Hardware Requirements
Hardware Group: Vision (IMAQ)
Driver: NI-IMAQ 2.5
Software Requirements
Application Software: LabVIEW Full Development System 6.0, LabWindows/CVI Full Development System 5.5
Language(s): C, LabVIEW
Hardware Requirements
Hardware Group: Vision (IMAQ)
Driver: NI-IMAQ 2.5
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).