Using SCXI and NI-DAQ for Simultaneous Sampling - Single Buffered
Downloads
Filename: 203206.zip
Requirements: View
Here is a short description of this program. Please refer to the code for full documentation. This program is designed for use with the SCXI-1520 module to demonstrate simultaneous track and hold functionality. You can use this program on other simultaneous track and hold modules, but you must change or remove the software settings depending on the capabilities of the module.
Read four voltages at the same settings from an SCXI-1520 module into a buffer using internal scan and sample timing. The DAQ device must have a scan clock and a channel clock.
| Related Links: |
| SCXI Examples with NI-DAQ Function Calls |
Requirements
Filename: 203206.zip
Software Requirements
Application Software: LabWindows/CVI Full Development System 6.0
Language(s): C
Hardware Requirements
Hardware Group: Multifunction DAQ (MIO)
Driver: Traditional NI-DAQ (Legacy) 6.9.1
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).
