Using the Electronic Gear option on the Mitsubishi MR-J2S Series Drives with NI-Motion Plug-in Motion Controller
PrintDownloads
Filename: mitsubishi_electronic_gear.llb
Requirements: View
1. Calculates the e-gearng values for a Mitsubishi drive when given the following parameters:
- The desired Steps per Revolution on the motion controller
- The Servo motor resolution [pulses/rev] as defined by the drive.
2. Calculates the Steps per Revolution on the motion controller when given the following parameters:
- The e-gearing values
- The Servo motor resolution [pulses/rev] as defined by the drive.
Note:
Electronic Gear calculations for Panasonic and Yaskawa drives is coming soon.
Requirements
Filename: mitsubishi_electronic_gear.llb
Software Requirements
Application Software: LabVIEW Full Development System 7.1
Language(s): LabVIEW
Hardware Requirements
Hardware Group: Motion Control
Hardware Model: FW-7344, PCI-7330, PCI-7332, PCI-7334, PCI-7340, PCI-7342, PCI-7344, PCI-7350, PCI-7352, PCI-7354, PCI-7356, PCI-7358, PXI-7330, PXI-7332, PXI-7334, PXI-7340, PXI-7342, PXI-7344, PXI-7352, PXI-7354, PXI-7356, PXI-7358
Driver: NI-Motion 7.0
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).