VB6 niHSDIO - Dynamic Generation and Acquisition-Source Synchronous
PrintDownloads
Filename: 203522.zip
Requirements: View
This example demonstrates how to perform a source synchronous dynamic generation and acquisition on a single high speed digital device. This example will account for cable delays that the data may experience while travelling from the generation channels to the acquisition channels. The Sample clock is exported on the DDC CLK Out pin by the generation session, and the acquisition will use the STROBE pin as its Sample clock source. The generation will export its data active event to PFI 1 and the acquisition will receive the start trigger from PFI 2.
I/O Connection Overview:
To ensure source synchronous generation and acquisition, use equal length cable to make the following connections on the terminal block:
1) DDC CLK Out to STROBE
2) PFI 1 to PFI 2
3) Data lines 0-7 to Data lines 8-15 (Connect line 0 to line 8, etc.)
| Related Links: |
| Using NI-HSDIO with Microsoft Visual Basic 6.0 |
Requirements
Filename: 203522.zip
Software Requirements
Language(s): Visual Basic
Additional Software: Visual Basic 6.0
Hardware Requirements
Hardware Group: Digital I/O (DIO)
Hardware Model: PXI-6551, PXI-6552, PXI-6561, PXI-6562, PCI-6541, PXI-6542, PCI-6551, PCI-6552, PCI-6561, PCI-6562, PXI-6541, PCI-6542
Driver: NI-HSDIO 1.4
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).