VB6 niHSDIO - Stimulus Response-Load From HWS File
PrintDownloads
Filename: 203526.zip
Requirements: View
This example demonstrates how to provide stimulus data to a device under test (DUT), and then acquire and compare the response data from the DUT to a set of expected response values. The stimulus and expected response values are provided in an HWS data file.
| Related Links: |
| Using NI-HSDIO with Microsoft Visual Basic 6.0 |
Requirements
Filename: 203526.zip
Software Requirements
Language(s): Visual Basic
Additional Software: Visual Basic 6.0
Hardware Requirements
Hardware Group: Digital I/O (DIO)
Hardware Model: PCI-6541, PCI-6542, PCI-6551, PCI-6552, PCI-6561, PXI-6562, PXI-6541, PXI-6542, PXI-6551, PXI-6552, PXI-6561, PCI-6562
Driver: NI-HSDIO 1.4
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).