Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

Waveform Generation through NI-DAQ in CVI for DSA Boards

3 ratings | 5.00 out of 5
Print

Downloads

Filename: dsawfmc.zip
Requirements: View

This simple example generates a sine wave on one output of a PCI-4451 or NI-4551 DSA Board in NI-DAQ mode using C functions.
[NOTE: For further details on each NI-DAQ function, please refer to the NI-DAQ On-Line Help (NIDAQPC.HLP).]
Pin Connection Information:
The analog output signal will be available at AO channel 0. The default analog output mode for the DAQ device will be used.
(For further I/O connection details, please refer to your hardware User Manual.)
* For further details on how to run this example, please refer to the NI-DAQ Examples On-Line Help (NIDAQEx.HLP)

Requirements


Filename: dsawfmc.zip

Software Requirements


Application Software: LabWindows/CVI Full Development System 5.0.1
Language(s): C

Hardware Requirements


Hardware Group: Multifunction DAQ (MIO)
Driver: Traditional NI-DAQ (Legacy) 6.5.2

 
3 ratings | 5.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).