Using the SCXI-1540 with Virtual Channels
PrintDownloads
Filename: scxi-1540_virtual_channel.vi
Requirements: View
1. Enter the proper device number. It defaults to 1. Use this value when you have only one data acquisition device in your computer.
2. Enter the name of the virtual channel that you created in the channel string field in MAX.
3. Once you have entered these values, you can run the VI.
Keep in mind that you can create your virtual channel to give the value of displacement in either mil or mm. This particular VI works with either type, but the label on the front panel references mil. The label has no bearing on how your VI operates.
Requirements
Filename: scxi-1540_virtual_channel.vi
Software Requirements
Application Software: LabVIEW Full Development System 5.0
Language(s): LabVIEW
Hardware Requirements
Hardware Group: Multifunction DAQ (MIO)
Driver: Traditional NI-DAQ (Legacy) 6.8.0
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).