Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

M Series: Analog Trigger Source

1 ratings | 5.00 out of 5
Print

Downloads

Filename: m_series_analog_trigger.zip
Requirements: View

With M Series devices, PFI0 does not double as both a digital and analog trigger. PFI0 is now only a digital trigger inut. There are now two analog trigger inputs, APFI0 and APFI1. This example performs a continuous analog output task using an internal sample clock and an analog start trigger on APFI0.

Requirements


Filename: m_series_analog_trigger.zip

Software Requirements


Application Software: LabWindows/CVI Full Development System 7.0
Language(s): C

Hardware Requirements


Hardware Group: Multifunction DAQ (MIO)
Driver: NI-DAQmx 7.3

 
1 ratings | 5.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).