M Series: Correlated Digital Output with Analog Output Sample Clock
This example demonstrates how to continuously output analog data while synchronously outputting correlated digital data on an M Series DAQ device. The synchronized outputs use the same onboard sample clock, ao/SampleClock. After the outputs have been configured and started, data is continuously written until an error occurs or the stop button on the front panel of this VI is pressed.
Requirements
Filename: 4643.llb
Software Requirements
Application Software: LabVIEW Base Development System 7.0
Language(s): LabVIEW
Hardware Requirements
Hardware Group: Multifunction DAQ (MIO)
Hardware Model: PCI-6220, PXI-6289, PCI-6222, PCI-6224, PCI-6229, PCI-6250, PCI-6251, PCI-6254, PCI-6259, PCI-6280, PCI-6281, PCI-6284, PXI-6220, PXI-6221, PXI-6230, PXI-6224, PXI-6229, PXI-6250, PXI-6251, PXI-6254, PXI-6259, PXI-6280, PXI-6281, PXI-6284, PCI-6221
Driver: NI-DAQmx 7.3
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).
