Making Pulse and Transition Measurements with the NI-4070
Print
This example uses the NI-4070 in isolated digitizer mode to acquire waveforms.
Using standard LabVIEW waveform functions, the example makes transition measurements such as rise time and slew rate as well as pulse measurements such as period, duty cycle, cycle RMS, and upper and lower amplitude levels.
Filename: 4644.llb
Application Software: LabVIEW Full Development System 7.1
Language(s): LabVIEW
Hardware Group: Digital Multimeters (DMM)
Hardware Model: PXI-4070, PCI-4070
Driver: NI-DMM 2.2.0
Using standard LabVIEW waveform functions, the example makes transition measurements such as rise time and slew rate as well as pulse measurements such as period, duty cycle, cycle RMS, and upper and lower amplitude levels.
Requirements
Filename: 4644.llb
Software Requirements
Application Software: LabVIEW Full Development System 7.1
Language(s): LabVIEW
Hardware Requirements
Hardware Group: Digital Multimeters (DMM)
Hardware Model: PXI-4070, PCI-4070
Driver: NI-DMM 2.2.0
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).