Multi Tone Generator and FFT Power Spectrum Analyzer DAQmx
Print
This demonstrates the use of the Basic Mulitone.vi and FFT Power Spectrum.vi.
This vi outputs a multitone signal on an analog output channel and then reads a signal and displays the output processed through an FFT Power Spectrum. This vi was intended to have the analog output looped back into the analog input.
Filename: 25009.vi
Application Software: LabVIEW Full Development System 7.0, LabVIEW Full Development System 7.1.1, LabVIEW Full Development System 7.1
Language(s): LabVIEW
Hardware Group: Multifunction DAQ (MIO)
Hardware Model: PCI-6251, PCI-6024E
Driver: NI-DAQmx 7.5
This vi outputs a multitone signal on an analog output channel and then reads a signal and displays the output processed through an FFT Power Spectrum. This vi was intended to have the analog output looped back into the analog input.
Requirements
Filename: 25009.vi
Software Requirements
Application Software: LabVIEW Full Development System 7.0, LabVIEW Full Development System 7.1.1, LabVIEW Full Development System 7.1
Language(s): LabVIEW
Hardware Requirements
Hardware Group: Multifunction DAQ (MIO)
Hardware Model: PCI-6251, PCI-6024E
Driver: NI-DAQmx 7.5
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).