Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

Multiple Counter Period Measurement and Two Edge Separation Example in Visual Basic

0 ratings | 0.00 out of 5
Print

Downloads

Filename: signal_difference.zip
Requirements: View

This example uses the Multiple Counter controls to take a period measurement with one counter and the separation in time of three other signals from the start of the period. The measurements are continuous and depend and a count or stop trigger.

This Visual Basic Example is similar to the LabVIEW Example Titled "Multiple Counter Period Measurement and Two Edge Seperation Example".

Set the device, counter, aux line, and gate sources in the property pages. This example will count the edges of the source signal that occur between a rising edge on the aux line signal and the next rising edge on the gate signal.

Requirements


Filename: signal_difference.zip

Software Requirements


Application Software: Measurement Studio Visual Basic Support 6.0
Language(s): Visual Basic

Hardware Requirements


Hardware Group: Multifunction DAQ (MIO)
Driver: Traditional NI-DAQ (Legacy) 6.9.0

 
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).