Modular Instruments and LabWindows/CVI Interactive Tutorial Code
PrintDownloads
Filename: miandcvi.zip
Requirements: View
This example is meant to accompany the Modular Instruments and LabWindows/CVI Interactive Tutorial (see link below). This example demonstrates using LabWindows/CVI and Modular Instruments digitizers to acquire an input signal and perform a FFT frequency calculation on the result.
Instructions:
1) Connect a test signal to the desired channel of the digitizer.
2) Run the NIScopeExample application and input the resource name and the desired input channel of the digitizer.
3) Press the Acquire button.
Requirements
Filename: miandcvi.zip
Software Requirements
Application Software: LabWindows/CVI Full Development System 7.1
Language(s): C
Hardware Requirements
Hardware Group: High-Speed Digitizers (Scopes)
Hardware Model: PCI-5102, PCI-5112, PCI-5122, PCI-5124, PCI-5911, DAQCard-5102, PXI-5102, PXI-5112, PXI-5122, PXI-5124, PXI-5152, PXI-5620, PXI-5621, PXI-5911, PXI-5922
Driver: NI-FGEN 2.3, NI-SCOPE 2.7
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).