5404 User Defined Step for Signal Express
PrintDownloads
Filename: using5404.zip
Requirements: View
***Instructions for the 5404 User Defined Step Example for SignalExpress 2.0***
1. Insert a User-Defined Step in your SignalExpress project.
2. Browse for the 5404_User_Defined_Step.vi located in the 5404_User_Defined_Step.llb.
3. Select the Configure VI tab on the Step Setup Dialog Box.
4. Specify the appropriate device, configuration, and functionality for your measurement application.
5. Click the Run button to begin simultaneously outputting a sine wave and clock pulse on your 5404. Notice that you can modify the characteristics of the outputs as the step is running.
6. If you have an NI Scope card, wire the outputs of your 5404 to the inputs of your Scope card and add an NI-Scope Acquire Step in Signal Express to measure the generated signals. Otherwise, view them on an oscilloscope or other instrument. Remember that the voltages listed assume that the outputs of the 5404 terminate into high impedance. For more information please visit NI Signal Generators Help.
| Related Links: |
| NI Signal Generators Help |
Requirements
Filename: using5404.zip
Software Requirements
Application Software: SignalExpress Development System 2.0
Language(s): LabVIEW
Hardware Requirements
Hardware Group: Signal Source (AWG/FG/AO)
Hardware Model: PXI-5404
Driver: NI-FGEN 2.3
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).