NI-DAQmx: Check the Status of Outports on a PCI-6527
PrintDownloads
Filename: daqmx_write_read_dig_port.vi
Requirements: View
Instructions for Running:
1. Select the digital port on the DAQ device to be written.
2. Select a value to write using the input cluster.
Note: The Data read is in hexadecimal.
I/O Connections Overview:
Make sure your signal output terminals match the Ports I/O Control. In this case wire the item to receive the signal to the first N digital lines on your DAQ Device.
Requirements
Filename: daqmx_write_read_dig_port.vi
Software Requirements
Application Software: LabVIEW Base Development System 7.0
Language(s): LabVIEW
Hardware Requirements
Hardware Group: Digital I/O (DIO)
Hardware Model: PCI-6527
Driver: NI-DAQmx 7.5
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).