One Axis Contour Move in C#.NET
PrintDownloads
Filename: oneaxiscontourmovemonitor.zip
Requirements: View
When the form loads, a single period sine wave array with an amplitude of 1000 is generated. After clicking the start button, the axis selected is set to Absolute Contouring mode, the buffer is configured and written to, and the move begins. The move will continue until the Move Complete status is true or an error occurs.
The motion functions used in this example are imported directly from the FlexMotion32.dll using the DLLImport method.
Requirements
Filename: oneaxiscontourmovemonitor.zip
Software Requirements
Language(s): C#
Additional Software: Visual Studio .NET 2003
Hardware Requirements
Hardware Group: Motion Control
Hardware Model: PCI-7330, PCI-7350, PCI-7340
Driver: NI-Motion 6.1.2
Reader Comments | Submit a comment »
alternative?
would you have a similar
tutorial/documentation using LabVIEW please?
- Aaron Cheng, Imperial College. yi.a.cheng@imperial.ac.uk - Jan 13, 2006
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).