Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 13, 2006

NI-TCLK Synchronize AWG and High-Speed Digitizer

0 ratings | 0.00 out of 5
Print

Downloads

Filename: ni_tclk_awg_dig_exx.zip
Requirements: View

This example demonstrates how to program NI-TClk with the NI 5421 arbitrary waveform generator and the NI 5122 high-speed digitizer.

The example is derived from both the niFgen_Arbitrary_Waveform_Example.vi and the niScope EX Configured Acquisition.vi example VIs that ship with the NIFGEN and NIScope drivers respectively. Refer to the respective example VI for information on issues related to NIFGEN or NIScope programming.

Requirements


Filename: ni_tclk_awg_dig_exx.zip

Software Requirements


Application Software: LabVIEW Full Development System 7.0
Language(s): LabVIEW

Hardware Requirements


Hardware Group: High-Speed Digitizers (Scopes), Signal Source (AWG/FG/AO)
Hardware Model: PCI-5124, PCI-5412, PCI-5421, PXI-5122, PCI-5122, PXI-5412, PXI-5421, PXI-5422, PXI-5441, PXI-5124
Driver: NI-FGEN 2.2.1, NI-SCOPE 2.7

 
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).