NI USB AutoLauncher
Downloads
Filename: ni_usb_auto_launcher.zip
Requirements: View
The application has a utility interface to allow users to associate a VI or an executable with a particular hardware model. Following this, the application listens for new USB devices to be plugged into the computer. Once a recognized device is plugged in, the associated VI or executable is automatically launched.
Requirements
Filename: ni_usb_auto_launcher.zip
Software Requirements
Language(s): LabVIEW
Hardware Requirements
Hardware Group: Multifunction DAQ (MIO), SCXI
Hardware Model: DAQPad-6015 for USB, DAQPad-6015 for USB w/BNC Term, DAQPad-6015 for USB w/Mass Term, DAQPad-6015 for USB w/Screw Term, DAQPad-6016 for USB w/Screw Term, USB-9215, DAQPad-6020E for USB w/Mass Term, SCXI-1600, USB-6008, USB-6009, USB-9211, DAQPad-6020E for USB w/BNC Term
Driver: NI-DAQmx Base 1.4, NI-DAQmx 7.3
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).
