NI-TCLK Synchronize AWG and High-Speed Digitizer in LabWindows/CVI
PrintDownloads
Filename: tclkcvi.zip
Requirements: View
This example demonstrates how to program NI-TClk with an arbitrary waveform generator and a high-speed digitizer.
Requirements
Filename: tclkcvi.zip
Software Requirements
Application Software: LabWindows/CVI Base Development System 8.0
Hardware Requirements
Hardware Group: High-Speed Digitizers (Scopes), Signal Source (AWG/FG/AO)
Driver: NI-FGEN 2.4, NI-SCOPE 3.0
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).