Using the GPIB-232CT-A (S Mode) in LabVIEW
PrintDownloads
Filename: gpib232cta_s_mode.zip
Requirements: View
This VI provides an example of using LabVIEW to communicate with a GPIB-232CT-A in S mode. S mode is used when the GPIB-232CT-A is connected to the PC via a Null Serial cable and is controlling one or more instruments via GPIB. The VI has two functions, the first is to test the GPIB-232CT-A to verify that the device is working and communicating properly with the PC. The second is to use the GPIB-232CT-A to send commands to an instrument (and recieve a response if appropriate).
Requirements
Filename: gpib232cta_s_mode.zip
Software Requirements
Application Software: LabVIEW Base Development System 7.0
Language(s): LabVIEW
Hardware Requirements
Hardware Group: GPIB
Hardware Model: GPIB-232CT-A
Driver: NI-VISA 3.0, NI-488.2 2.4
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).