Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Mar 27, 2007

Using the GPIB-232CT-A (S Mode) in VB6

1 ratings | 5.00 out of 5
Print

Downloads

Filename: gpib232cta_s_mode_vb6.zip
Requirements: View

This example code demonstrates how to program and use the GPIB-232CT-A in S mode in Visual Basic 6.0.  There are two programs included.  GPIB232CTA Test.vbp verifies that your communication with the GPIB-232CT-A itself is successful while GPIB232CTA Control uses the GPIB-232CT-A to communicate with an instrument.  To use the GPIB-232CT-A in S mode connect the GPIB-232CT-A to the serial port on your computer using a null serial cable, then connect the the GPIB-232CT-A to your GPIB instrument.  The default serial settings correspond to the GPIB-232CT-A jumper settings of On, Off, On, Off, Off, Off, On, Off (reading left to right).

Requirements


Filename: gpib232cta_s_mode_vb6.zip

Software Requirements


Language(s): Visual Basic
Additional Software: Visual Basic 6.0

Hardware Requirements


Hardware Group: GPIB
Hardware Model: GPIB-232CT-A
Driver: NI-488.2 2.4

 
1 ratings | 5.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).