NI-Scope: Configured Acquisition in c# 2005 Enabling the 5142 OSP FIR Filter.
PrintDownloads
Filename: niscope_osp_filter.zip
Requirements: View
This example demonstrates how to configure an acquisition with NI-Scope in c# 2005 using the .NET wrapper. It uses the updated NI-Scope wrapper, which requires NI-Scope 3.2 or greater.
This example creates the FIR filter coefficients for the 5142's equalization filter using the Measurement Studio Analysis library. It allows you to specify a low-pass cutoff frequency for which 35 coefficients are created and passed to the FIR filter in the 5142s OSP.
Requirements
Filename: niscope_osp_filter.zip
Software Requirements
Application Software: Measurement Studio .NET Support 8.1
Toolkits and Add-Ons: Measurement Studio Advanced Analysis Library 2.0
Language(s): C#
Additional Software: Visual Studio 2005
Hardware Requirements
Hardware Group: High-Speed Digitizers (Scopes)
Driver: NI-SCOPE 3.2
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).