Single Tone Measurement Properties with Measurement Studio in .NET
PrintDownloads
Filename: single_tone_measure_cs_2003.zip
Requirements: View
Filename: single_tone_measure_vb_2003.zip
Requirements: View
The Single Tone Measurement example demonstrates the single tone properties that are new in Measurement Studio 8.1. The properties of interest are the Residual Signal, Input Signal and Detected Signal. You can use single or multi plot instances to test any of these properties.
To run this example, download either the VB or C# example, open the solution and click on the run button in Visual Studio .NET 2003.
Requirements
Filename: single_tone_measure_cs_2003.zip
Software Requirements
Application Software: Measurement Studio .NET Support 8.1
Language(s): C#
Additional Software: Visual Studio .NET 2003
Software Requirements
Application Software: Measurement Studio Enterprise Edition System (Full Development System) 8.1
Language(s): Visual Basic .NET, Visual Studio .NET
Additional Software: Visual Studio .NET 2003
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).