Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Configuration Utility for TSW-500x Devices (to Create RF Transceiver with NI PCI-5640R)

0 ratings | 0.00 out of 5
Print

Overview

This example program contains a configuration utility for the Texas Instruments TSW-500x up/down converter modules. These modules can be combined with the NI PCI-5640R IF Transceiver module to create a software-configurable RF Transceiver solution.

Downloads

Filename: configure_tsw500x.zip
Requirements: View

The Texas Instruments TSW-5002 device is a 2.3 - 2.5GHz up/down converter module.  This module is configured with the attached example program, and can be used in conjunction with the NI PCI-5640R IF Transceiver module to create a low-cost, software-defined RF Transceiver. 

Please refer to the tutorial on A Low-Cost, 2.3 - 2.5GHz, Software-Defined RF Transceiver System  for more detailed information on the system setup, required components, and software. 

Requirements


Filename: configure_tsw500x.zip

Software Requirements


Application Software: LabVIEW Professional Development System 8.2
Language(s): LabVIEW

Hardware Requirements


Hardware Group: RF
Hardware Model: PCI-5640R
Driver: NI-RIO 2.1.3

 
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).