Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

niScope EX Auto Setup Info.vi

2 ratings | 4.00 out of 5
Print

Downloads

Filename: niscope_ex_auto_setup_info.vi
Requirements: View

This example is based on the Getting Started example VI that ships with NI-SCOPE 2.0. The niScope EX Getting Started.vi uses property nodes to read back horizontal and vertical settings that were used during the niScope Auto Setup.vi. More documentation is available in the VI by pressing .

Requirements


Filename: niscope_ex_auto_setup_info.vi

Software Requirements


Application Software: LabVIEW Full Development System 6.0.2
Language(s): LabVIEW

Hardware Requirements


Hardware Group: High-Speed Digitizers (Scopes)
Driver: NI-SCOPE 2.0.1

 
2 ratings | 4.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).