LabVIEW Real-Time Module 8.2.1 Benchmarks with LabVIEW FPGA Applications: Read/Write Performance
PrintDownloads
Filename: rt_timing.zip
Requirements: View
The Benchmark VI, the host VI in this application, reads and writes from the RT target to the FPGA device multiple times, then calculates on average how much time each access takes. The DifferentControls(FPGA) VI has various controls for the Benchmark VI to access.
The host VI runs on an NI cRIO-9002 controller. The FPGA VI runs on an NI cRIO-9101 chassis. To change the targeted hardware, refer to the link below.
Note: To benchmark other processes, please refer to the "Benchmark Project.lvproj" in the LabVIEW Example Finder at Help >> Find Examples.
Related Links:
Moving Examples to Another FPGA TargetRequirements
Filename: rt_timing.zip
Software Requirements
Application Software: LabVIEW Full Development System 8.2.1
Toolkits and Add-Ons: LabVIEW Real-Time Module 8.2.1, LabVIEW FPGA Module 8.2.1
Language(s): LabVIEW
Hardware Requirements
Hardware Group: CompactRIO, Real-Time (RT), Reconfigurable I/O (RIO)
Hardware Model: cRIO-9002
Driver: NI-RIO 2.2
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).