Present Octave Analysis (DAQmx)
PrintOverview
This VI acquires data from the specified channel. The data is scaled to engineering units, the averaged third-octave spectrum is computed, and the octave spectrum is weighted according to the specified frequency weighting. The octave results are then published to a table.
The third-octave spectrum is computed in accordance with the ANSI S1.11-2004 and the IEC 1260:1995 standards. This program is a shipping example VI included with the NI Sound and Vibration Measurement Suite and NI Sound and Vibration Toolkit.
This Virtual Instrument is designed to work with data acquisition hardware from National Instruments. To find compatible hardware for this application, visit ni.com/soundandvibration.
This software is written in LabVIEW, a graphical programming language designed for scientists and engineers. For more information about LabVIEW, visit ni.com/labview.
Sound and Vibration Developers Library
The NI Sound and Vibration Developers Library is your one-stop online resource for learning about and downloading code for acoustic analysis, machine diagnostics and audio test functions. On this page, you will find links to detailed tutorials, application notes, example programs, and analysis function descriptions.
More information on National Instruments signal processing can be found at the Signal Processing Resource Center.
Downloads
Filename: present_octave_results.vi
Requirements: View
Front Panel
This is a picture of the VI's front panel. To view the block diagram and additional documentation, download the attached file.
This example requires LabVIEW and the Sound and Vibration Measurement Suite. If you do not have access to these, you can always try them out online at the LabVIEW Online Evaluation.
Related Links
Requirements
Filename: present_octave_results.vi
Software Requirements
Application Software: LabVIEW Full Development System 8.2
Toolkits and Add-Ons: LabVIEW Sound and Vibration Toolset 5.0
Hardware Requirements
Hardware Group: Dynamic Signal Analyzers (DSA)
Driver: NI-DAQmx 8.3
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).