Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Jan 25, 2008

Fuse Inspection Example

0 ratings | 0.00 out of 5
Print

Overview

Signal Processing Resource Center » Vision Development Module Image Processing Examples » Fuse Inspection

This example loads a reference image that defines the coordinate system for the inspection task. The example then loads two templates that define the aspect of a good part. The example loads a new image, finds the new coordinate system, and matches the region of inspection against the golden templates and returns the results.

Learn more about common image processing algorithms and see case studies at Analysis in Machine Vision Applications

Front Panel

This example requires LabVIEW and is included with the Vision Development Module. Download the LabVIEW Evaluation and the Vision Development Module Evaluation to try this example. After installing the software, open LabVIEW and navigate to Help » Find Examples... » Toolkits and Modules.


[+] Enlarge Image

Related Links

0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).