Reference Example for Synchronizing a Retriggerable Analog Input with an External Sample Clock
PrintOverview
This example program will use an external sample clock to take only a finite number of samples every time an external trigger happens.
**The accompanying code represents a very specific use case for NI products. For more general examples, please refer to ni.com/examples, the LabVIEW Example Finder, or the NI driver help files that come with every NI driver.
Downloads
Filename: sync_ai.vi
Requirements: View
The program was originally written for CompactDAQ but will work with any m-series device.
See VI documentation for more information about how to configure and use.
Requirements
Filename: sync_ai.vi
Software Requirements
Application Software: LabVIEW Full Development System 8.2
Language(s): LabVIEW
Hardware Requirements
Hardware Group: CompactDAQ, Multifunction DAQ (MIO)
Driver: NI-DAQmx 8.6
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).