Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Dec 3, 2007

Subscribe

Add to Del.icio.us

DIGG this!


Feedback


Yes No

Related Categories

Products

Development Topic

Related Links - Developer Zone

Related Links - Products and Services

Clamp Example

0 ratings | 0.00 out of 5
Print

Overview

Signal Processing Resource Center » Vision Development Module Image Processing Examples » Clamp Example

This example illustrates the use of the horizontal clamp tool. You can draw a region of inspection that contains at least two edges in the image. The VI measures the distance between the first and last edges.

Learn more about common image processing algorithms and see case studies at Analysis in Machine Vision Applications

Front Panel

This example requires LabVIEW and is included with the Vision Development Module. Download the LabVIEW Evaluation and the Vision Development Module Evaluation to try this example. After installing the software, open LabVIEW and navigate to Help » Find Examples... » Toolkits and Modules.


[+] Enlarge Image

Related Links

0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).