WAV (*.wav) File Recorder (DAQmx)
PrintOverview
This VI acquires data from the specified channel and saves this data into a *.wav file. Scaling information is stored as a header in the WAV file. Triggered and non-triggered acquisition is supported.
This program is a shipping example VI included with the NI Sound and Vibration Measurement Suite and NI Sound and Vibration Toolkit.
This Virtual Instrument is designed to work with data acquisition hardware from National Instruments. To find compatible hardware for this application, visit ni.com/soundandvibration.
Downloads
Filename: svxmpl_wav_recorder.vi
Requirements: View
Front Panel
This is a picture of the VI's front panel. To view the block diagram and additional documentation, download the attached file.
This example requires LabVIEW and the Sound and Vibration Measurement Suite. If you do not have access to these, you can always try them out online at the LabVIEW Online Evaluation.
Related Links
Requirements
Filename: svxmpl_wav_recorder.vi
Software Requirements
Application Software: LabVIEW Full Development System 8.2
Toolkits and Add-Ons: LabVIEW Sound and Vibration Toolset 5.0
Language(s): LabVIEW
Hardware Requirements
Hardware Group: Dynamic Signal Analyzers (DSA)
Driver: NI-DAQmx 8.3
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).