Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Basic Spectral Measurement

0 ratings | 0.00 out of 5
Print

Overview

Signal Processing Resource Center » LabView Signal Processing Shipping Examples » Basic Spectral Measurement

This example shows how to take a spectral measurement of a simulated signal. The spectral measurement is a Peak FFT of the simulated signal. This example uses the following Express VIs: Simulate Signal and Spectral Measurements.

Learn more about how to Analyze Data with LabVIEW

Learn about using textual algorithms for signal processing with NI LabVIEW MathScript

Front Panel

This example requires the Full or Professional version of LabVIEW and is included as a shipping example. Download the LabVIEW Evaluation to try this example on your computer, or try the LabVIEW Online Evaluation to try LabVIEW without downloading any software. To run this example, open LabVIEW and navigate to Help » Find Examples... » Analyzing and Processing Signals » FFT and Frequency Analysis


[+] Enlarge Image



Related Links

0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).