Chapter 1: Dot Product
PrintOverview
This exercise introduces the NI LabVIEW Embedded Module for ADI Blackfin Processors and the process for deploying graphical code on the Blackfin processor for rapid prototyping and verification. This experiment utilizes arrays, functions, and the Inline C node within LabVIEW.
Learn more with the Getting Started with NI LabVIEW Embedded Module for ADI Blackfin Processors manual. This example is part of the Embedded Signal Processing with the Micro Signal Architecture textbook
Downloads
Filename: exp1_4.zip
Requirements: View
Front Panel
This example requires LabVIEW 8.5 and the LabVIEW Embedded Module for ADI Blackfin Processors.
Related Links
Requirements
Filename: exp1_4.zip
Software Requirements
Application Software: LabVIEW Full Development System 8.5
Toolkits and Add-Ons: LabVIEW Embedded Module for BlackFin Processors 8.6
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).