Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Pulse and Transition Measurements

0 ratings | 0.00 out of 5
Print

Overview

Signal Processing Resource Center » LabVIEW Signal Processing Shipping Examples » Pulse and Transision Measurements

This example shows the use of the four pulse and transition measurement VIs located on the Analyze»Waveform Measurements subpalette. In the display, reference levels are shown as red dashed lines, measurement results as green solid lines, and measurement intervals as green dotted lines.

Discover how to Analyze Data with LabVIEW

Learn about using textual algorithms for signal processing with NI LabVIEW MathScript

Front Panel

This example requires the Full or Professional version of LabVIEW and is included as a shipping example. Download the LabVIEW Evaluation to try this example on your computer, or visit the LabVIEW Online Evaluation to use LabVIEW without downloading any software. To run this example, open LabVIEW and navigate to Help » Find Examples... » Analyzing and Processing Signals » Pulse and Transition Measurements

 


[+] Enlarge Image

Related Links

 

0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).