Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

RF Record and Playback Test Panel

0 ratings | 0.00 out of 5
Print

Overview

This is a test panel which can be used with any combination of RFSA and RFSG hardware to test for functionality.

Downloads

Filename: rf_recordplayback_testpanel.zip
Requirements: View

This example is not intended to be used as reference for an application. If you plan to do this, we recommend using the RF Record and Playback Application Reference also linked below.

Front Panel


[+] Enlarge Image

 

To record simply select the VSA Tab, then the RFSA resource name and press the start button:

 

 

The following VI will open:

 


[+] Enlarge Image

 

 

The Panel will show the status “recording”  and with small delay, you will see the signal if you enable the display.

Your recording will stop only if you press the stop button or there was an error.

You can now change to Playback mode by selecting the VSG tab, selecting the resource name and start the generation.

 

 

NOTE: The display may take some time to graph (while the first block is being written).

 

You can also perform Off Line Analysis of a recorded file:


[+] Enlarge Image

 

If you are planning in starting a new RF Record and Playback, you can use the Reference Application Example linked below.

 RF Record and Playback Reference Application

Requirements


Filename: rf_recordplayback_testpanel.zip

Software Requirements


Application Software: LabVIEW Full Development System 8.5
Toolkits and Add-Ons: LabVIEW Advanced Signal Processing Toolset 7.5, Spectral Measurements Toolkit 2.3
Language(s): LabVIEW

Hardware Requirements


Hardware Group: RF
Hardware Model: PXIe-5672, PXI-5661
Driver: NI-RFSG 1.3.1, NI-RFSA 2.0.7

 
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).