NI ELVIS II Light Sensor Lab
PrintOverview
This lab introduces students to the NI ELVIS II Design and Prototyping Platform and the Vernier plug-in sensors. A Vernier Light Sensor is connected to the protoboard and measured through the driver software. This example is part of "Teaching Measurements and Instrumentation with NI ELVIS II."
Downloads
Filename: vernier_light_sensor.vi
Requirements: View
Filename: vernier_light_sensor_lab.pdf
Vernier Light Sensor Lab
This is a free downloadable lab to be used with NI ELVIS II hardware, DAQmx 8.7.x software, LabVIEW 8.5.x and a plug-in Vernier Light Sensor. Students can learn circuit concepts with measurement and instrumentation by referring to the Vernier Light Sensor Lab document and completing the exercise steps.
Please open the attached PDF and LabVIEW files to begin!
Requirements
Filename: vernier_light_sensor.vi
Software Requirements
Application Software: LabVIEW Full Development System 8.5
Hardware Requirements
Hardware Model: NI ELVIS 2
Driver: NI ELVISmx Software 4.0
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).