Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006


Feedback


Yes No

Related Categories

Products

Development Topic

Onboard Analog Input Using Return Data Buffer - Flexmotion

0 ratings | 0.00 out of 5
Print

Downloads

Filename: adc-host-rdb.vi
Requirements: View

This example demonstrates how to use onboard programming to do hardware timed analog input. The onboard program samples analog input channel 1 and passes the data back to the host via the Return Data Buffer. The sampling rate can vary from 1 to 150Hz.

To Run this VI:
1) Initialize the Flexmotion board
2) Wire input signal to AIN1 and AIGND
3) Set the sampling rate
4) Run the VI

Requirements


Filename: adc-host-rdb.vi

Software Requirements


Application Software: LabVIEW Full Development System 6.0
Language(s): LabVIEW

Hardware Requirements


Hardware Group: Motion Control
Driver: NI-Motion 5.0.1, NI-Motion

 
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).