Synchronization of arbiratry waveform generators and digitizers in VB 6.0
PrintOverview
This example synchronizes 2 arbitrary waveform generators and a high speed digitizer using NI-TCLK. It is programmed in Visual Basic 6.0.
Downloads
Filename: syncscopesandarbs.zip
Requirements: View
To run this example, connect the output of Arb1 into CH0 of the digitizer and the output of Arb2 into CH1. The digitizer will is looking at CH1 for an analog trigger and is then collecting samples on both channels. It is only displaying the data collected on CH0 though. The data is averaged and output on the user interface and is also logged in a file located in your c:\ directory.
Requirements
Filename: syncscopesandarbs.zip
Software Requirements
Language(s): Visual Basic
Hardware Requirements
Hardware Group: High-Speed Digitizers (Scopes), Signal Source (AWG/FG/AO)
Driver: NI-SCOPE 3.5, NI-FGEN 2.6
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).