Continuously Generate and Acquire Source Synchronous Data with Software Compare
PrintOverview
A source synchronous generation and acquisition loopback that uses a start trigger and software data comparison.
Downloads
Filename: genacq_sourcesync_swcompare.vi
Requirements: View
Generate and Acquire Source Synchronous Data with Software Compare
This example demonstrates how to generate and acquire source synchronous data in a loop back. The generation
session will generate the output data on ports 0:1 with a clock signal on PFI 4. The acquisition session will
acquire data on ports 2:3 based on the clock signal on PFI 5. The Data Active event for the generation session is used as a Start Trigger for the acquisition session.
Please read the VI documentation in order to make the correct external corrections to run the example.
Related Links:
Synchronous Communications and Timing Configurations in Digital Devices
Requirements
Filename: genacq_sourcesync_swcompare.vi
Software Requirements
Application Software: LabVIEW Full Development System 8.0
Language(s): LabVIEW
Hardware Requirements
Hardware Group: High-Speed Digital I/O
Hardware Model: NI PCIe-6535, NI PCIe-6536, NI PXIe-6537, NI PXIe-6535, NI PXIe-6536, NI PCIe-6537
Driver: NI-DAQmx
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).