Using Simulation Models with NI VeriStand
PrintOverview
NI VeriStand can be used to interact with models from a variety of modeling environments and programming languages. It can run compiled models created in any supported modeling environment as well as uncompiled models (.mdl files) created using The MathWorks, Inc. Simulink® software. This document lists supported modeling environments that have been tested and verified to be able to create compiled models that can be imported in NI VeriStand.
LabVIEW Control Design and Simulation Module
The MathWorks, Inc. Simulink® software
Note: It is possible to run models (.mdl) created in Simulink if The MathWorks, Inc. MATLAB® software and Simulink are installed on the development computer. In this case, the host computer also must be the execution host. Uncompiled models can only be run on a computer running the Windows operating system.
GT-POWER from Gamma Technologies
AVL BOOST
AVL CRUISE
MapleSim from MapleSoft
Dynacar from Tecnalia
CarSim from Mechanical Simulation
TESIS DYNAware software
C/C++
Fortran
MATRIXx SystemBuild
MATLAB®, Simulink®, and Real-Time Workshop® are registered trademarks of The MathWorks, Inc. Other product and company names listed are trademarks and trade names of their respective companies.
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).