Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

Subscribe

Add to Del.icio.us

DIGG this!


Feedback


Yes No

Related Categories

Products

Development Topic

Related Links - Developer Zone

Related Links - Products and Services

Controlling LabVIEW from HiQ

4 ratings | 3.25 out of 5
Print

Downloads

Filename: hiq_and_lv.zip
Requirements: View

This example uses ActiveX Automation to control a LabVIEW VI from HiQ. The attached zip file contains a LabVIEW 5.x VI, a LabVIEW 6.x VI, and a HiQ Notebook. The HiQ Notebook opens a reference to the VI, sets two control values, and runs the VI. While the VI is running, HiQ reads two indicators from the VI.

Use the "Path" variable in the Notebook to specify which VI to control before you run the script. (You must also specify the actual path to the VI.)
Note: You must have LabVIEW 5.x or 6.x installed, to use this example.

Requirements


Filename: hiq_and_lv.zip

Software Requirements


Application Software: HiQ Development System 4.1
Language(s): None

 
4 ratings | 3.25 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).