Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

Subscribe

Add to Del.icio.us

DIGG this!


Feedback


Yes No

Related Categories

Products

Development Topic

Related Links - Developer Zone

Related Links - Products and Services

Configuring Your FlexMotion Board for Digital Output

2 ratings | 5.00 out of 5
Print

Downloads

Filename: flex0003.zip
Requirements: View

This example shows how to configure one of the auxillary digital I/O ports on your FlexMotion board as an output port, set the outputs for noninverting mode, and then write an output to it.

Also see the "Motion Control Troubleshooting Wizard" (LINK BELOW) for more information on this and other Motion Control examples.


Related Links:
Motion Control Troubleshooting Wizard

Requirements


Filename: flex0003.zip

Software Requirements


Application Software: LabVIEW Full Development System 5.0.1
Language(s): LabVIEW

Hardware Requirements


Hardware Group: Motion Control
Driver: NI-Motion 7.7

 
2 ratings | 5.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).