Count Internal Timebase with Two Counters on PCI-660x (Buffered Event Counting)
Print
This VI uses two counters to count the internal timebase of the PCI-660x board using buffered event counting. It illustrates how to synchronize two counters using buffered event counting and triggering. For more detailed information, please refer to the front panel of the VI.
Filename: 1637.llb
Application Software: LabVIEW Full Development System 6.0
Language(s): LabVIEW
Hardware Group: Counter/Timers (TIO)
Driver: Traditional NI-DAQ (Legacy) 6.9.2, Traditional NI-DAQ (Legacy) 6.9.1
Requirements
Filename: 1637.llb
Software Requirements
Application Software: LabVIEW Full Development System 6.0
Language(s): LabVIEW
Hardware Requirements
Hardware Group: Counter/Timers (TIO)
Driver: Traditional NI-DAQ (Legacy) 6.9.2, Traditional NI-DAQ (Legacy) 6.9.1
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).