Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006

Add to Del.icio.us

DIGG this!


Feedback


Yes No

Related Categories

Products

Development Topic

Related Links - Developer Zone

Related Links - Products and Services

Change Adapter Tool for TestStand 2.0.x

0 ratings | 0.00 out of 5
Print

Downloads

Filename: changeadaptertool.zip
Requirements: View

This tool will allow you to change module adapters for pre-existing steps in a TestStand sequence. When you change module adapters, information regarding the specified module will be unloaded. Step properties that you have already configured (including preconditions, run options, post actions, loop options, synchronization, and expressions) will remain the same. This allows you to change module adapters keeping any step properties and only have to specify a new module. Please refer to the README.txt file located inside of the attached zip file for installation instructions. Once installed, simply select one or more steps and then go to Tools>>Change Adapter.

Requirements


Filename: changeadaptertool.zip

Software Requirements


Application Software: NI TestStand Development System 2.0
Language(s): None

 
0 ratings | 0.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).