Continuous Analog Input using Visual Basic 6.0 and Measurement Studio 6.0
Print
This example demonstrates how to do a simple continuous or finite acquisition from a NI data acquisition device and then display the data on a CWGraph control in Visual Basic using Measurement Studio ActiveX controls for Visual Basic.
Filename: ai.zip
Application Software: Measurement Studio Visual Basic Support 6.0
Language(s): Visual Basic
Additional Software: Visual Basic 6.0
Hardware Group: Multifunction DAQ (MIO)
Driver: Traditional NI-DAQ (Legacy) 6.5.0
Requirements
Filename: ai.zip
Software Requirements
Application Software: Measurement Studio Visual Basic Support 6.0
Language(s): Visual Basic
Additional Software: Visual Basic 6.0
Hardware Requirements
Hardware Group: Multifunction DAQ (MIO)
Driver: Traditional NI-DAQ (Legacy) 6.5.0
Reader Comments | Submit a comment »
Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).