Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

Document Type: Example Program
NI Supported: Yes
Publish Date: Sep 6, 2006


Feedback


Yes No

Related Categories

Products

Development Topic

Related Links - Developer Zone

Related Links - Products and Services

NI Sources External Calibration

1 ratings | 5.00 out of 5
Print

Downloads

Filename: 200322.llb
Requirements: View

This example allows you to perform a complete external calibration on any NI 5401, NI 5411, or NI 5431 signal generator. You can select which parts on the signal generator you would like to calibrate and the example walks you through each separate calibration procedure. You will need an external measurement device to perform frequency, amplitude, DC voltage, and duty cycle measurements, which is used by the example to calibrate the signal generator.

Requirements


Filename: 200322.llb

Software Requirements


Application Software: LabVIEW Full Development System 6.0.2
Language(s): LabVIEW

Hardware Requirements


Hardware Group: Signal Source (AWG/FG/AO)
Hardware Model: PCI-5401, PCI-5411, PCI-5431, PXI-5401, PXI-5411, PXI-5431
Driver: NI-FGEN 1.5

 
1 ratings | 5.00 out of 5
Print

Reader Comments | Submit a comment »

 

Legal
This example program (this "program") was developed by a National Instruments ("NI") Applications Engineer. Although technical support of this program may be made available by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS EXAMPLE PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).