electrical noise floor
PrintThe noise level due to the inherent noise in a circuit with no signal connected to the input.
When the noise floor is measured as a function of frequency, it is usually normalized to 1 Hz bandwidth, and is given as the V2/Hz or voltage per square root of Hz, commonly called volts per root Hertz.
Units:
Reader Comments | Submit a comment »
Legal
This tutorial (this "tutorial") was developed by National Instruments ("NI"). Although technical support of this tutorial may be made available by National Instruments, the content in this tutorial may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this content with each new revision of related products and drivers. THIS TUTORIAL IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).