continuous sweep mode
PrintA mode of a spectrum analyzer or oscilloscope where the measurement is continuously being repeated by either sweeping over the same frequency range (for a spectrum analyzer) or time base (for an oscilloscope).
Modern FFT-based spectrum analyzers do not sweep across a frequency range, but process all frequencies at the same time.
Refer to the RF & Communications Resources page for additional information about RF terminology, fundamentals, and National Instruments RF products.
Reader Comments | Submit a comment »
Legal
This tutorial (this "tutorial") was developed by National Instruments ("NI"). Although technical support of this tutorial may be made available by National Instruments, the content in this tutorial may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this content with each new revision of related products and drivers. THIS TUTORIAL IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE (http://ni.com/legal/termsofuse/unitedstates/us/).